Q.5.62 February 2021
Page 19
© Copyright 2021 KE2 Therm Solutions, Inc., Washington, Missouri 63090
KE2 EdgeManager
(KE2-EM35)
Overview, Installation, and Setup Instructions
Static WAN -
Assign a static IP
Address to the WAN Port
All fields must be keyed in if not designated as
optional, anything displayed in a field is strictly
a place holder.
❶
Enter desired IP Address
❷
Enter Subnet Mask
❸
Enter Default Gateway
❹
Enter Primary DNS
❺
Check the box to statically assign IP address
Check the box Use Hidden SSID
Enter the SSID
Enter the password.
Then, check the box for
AP or Tether.
A
B
D
C
A
B
C
D
Tethering Option 3:
Bridging to Hidden SSID
Bridging to 802.1x Authentication
Click in the Wi-Fi section, and select the
SSID that uses 802.1x Authentication
Enter Identity and Password.
Check the AP, or the Tether
box to complete the connection.
(If using Tether only please wire into LAN)
A
B
C
A
B
B
C
Static LAN -
Assign a static IP
Address to the LAN Port
Similar to Static WAN All, fields must be keyed
in if not designated as optional, anything
displayed in a field is strictly a place holder.
❶
Enter desired IP Address
❷
Enter Subnet Mask
❸
Check the box to statically assign IP address
Tethering Option 2:
Bridging – No AP
A
C
to
Follow the steps from Option 1
Check the Tether box.
D
D
Wifi Repeater -
(Beta)
Act as a Wifi repeater for an existing Wifi
network. Gives EM35 access to internet and
extends the range of existing Wifi network.
KE2EDGE-xxxxxx profile will no longer be seen
.
