manualshive.com logo in svg

Keatec Energy DBL MX-U Series, Manual

The Keatec Energy DBL MX-U Series is an innovative energy solution designed for efficient power management. With a comprehensive and user-friendly manual, users can easily understand and operate the system. Download the manual for free at our website to get started with optimizing your energy consumption and saving costs.

Share
Download
background image

7.4

Battery Configuration (48VDC) 1000U-48, 1500U-48 & 2000U-48…………  ………….……...17

7.5 

This Section Intentionally Left Blank..…….......……………………………………………….…...18

7.6 
7.7 
7.8 

This Section Intentionally Left Blank……………………………………………………….…..…..18 

This Section Intentionally Left Blank.……………………………………………………….……..19

Section 8 

UPS Installation

 

8.1 

UPS Complete UPS System Connection Diagram…………………..…………………….....21,22

Section 9

 

UPS System Operation

 

9.1  

UPS Start-UP With AC Applied………………………………………….…………..………....…. 23

Section 10

 

UPS Alarm Latched Condition

9.2

Using the Control Panel To View Parameters…..……………………………..…………………..24

9.3

AC Input Voltage…………………………..…………………….……………………………........…24

   9.4

Input Frequency………………………………….…………………………………….………….......24

9.5
9.6 

UPS Output Voltage………………………………..………………………..……………..……..….24
UPS Output Frequency………………………    ………………………..…………….….…...........25
UPS Output Load Percentage………………………    ………………………..…………….….….25 

9.7

UPS Output Current…………………………………………….……………………........................25

Battery Temperature Probe.....................................................................................................20

9.8
9.9         Battery String Voltage..............................................................................................................25

9.1.1    UPS Internal Surface Temperatue.............................................................................................25

9.1.2   Cold Starting The UPS  Using The Batteries..............................................................................26

10.1    UPS Latched Alarm...................................................................................................................27

10.2    Procedure To Release The Latched Condition.........................................................................27

10.3    UPS Default Parameters...........................................................................................................28

10.4    Audible Alarm............................................................................................................................28

10.5    Self Test....................................................................................................................................28

10.6    Bypass VAC Window................................................................................................................29

10.7    Output Frequency Window........................................................................................................29

10.8    Inverter Output Voltage.............................................................................................................29

10.9    UPS Operation Mode................................................................................................................30

10.1.1  UPS ECO Mode ......................................................................................................................30

10.1.2  UPS Frequency Mode 50Hz....................................................................................................30
10.1.3  UPS Frequency Mode 60Hz....................................................................................................30

10.1.4  UPS Output Fine Tuning VAC Values......................................................................................30

DBL MX-U Series UPS Outdoors 1000-2000W 120V Manual English 

20180312

 

- This manual  is for qualified  personnel  only

Summary of Contents for DBL MX-U Series



















































Reviews:

No comments

Related manuals for DBL MX-U Series

Qoltec 53970 User Manual preview
53970
Brand: Qoltec Pages: 5
Eaton 9395 UPS Installation And Operation Manual preview
9395 UPS
Brand: Eaton Pages: 256
Centralion ENDURE 1000VA User Manual preview
ENDURE 1000VA
Brand: Centralion Pages: 8
Riello UPS Master-HP 160 User Manual preview
Master-HP 160
Brand: Riello UPS Pages: 85
Riello UPS MASTER HP-UL Series User Manual preview
MASTER HP-UL Series
Brand: Riello UPS Pages: 84
Centralion MaxPower 1000 User Manual preview
MaxPower 1000
Brand: Centralion Pages: 9
Centralion DC UPS User Manual preview
DC UPS
Brand: Centralion Pages: 13
Centralion 400VA Service Manual preview
400VA
Brand: Centralion Pages: 33
Centralion 1000VA 1500VA User Manual preview
1000VA 1500VA
Brand: Centralion Pages: 40
FSP Technology Proline 3/1 10K User Manual preview
Proline 3/1 10K
Brand: FSP Technology Pages: 15
Dynex TE685AVR User Manual preview
TE685AVR
Brand: Dynex Pages: 4
Lanches 350VA User Manual preview
350VA
Brand: Lanches Pages: 8
ABB 8408608 User Manual preview
8408608
Brand: ABB Pages: 40
Eaton Powerware 9355 Installation Manual preview
Powerware 9355
Brand: Eaton Pages: 36
IBM 11000 VA LCD 5U Installation And Maintenance Manual preview
11000 VA LCD 5U
Brand: IBM Pages: 92
EGS Sola Hevi-Duty S1K Series Mounting Instructions preview
Sola Hevi-Duty S1K Series
Brand: EGS Pages: 2
MGE UPS Systems Protection Center 420 Installation And User Manual preview
Protection Center 420
Brand: MGE UPS Systems Pages: 28
legasy LI800 User Manual preview
LI800
Brand: legasy Pages: 2

Brands by name

Popular brands

Load more brands