8
1.5
Qualified Personnel
a)
C6 HMI / C6 HMI LC may be operated only by personnel qualified for the
specific task in accordance with the relevant documentation for the specific
task, in particular its warning notices and safety instructions.
b)
Qualified personnel are those who, based on their training and experience,
are able to identify risks and avoid potential hazards when working with
these systems.
1.6
Basic knowledge required
a)
To understand operating instructions a general knowledge of automation
technology is needed.
b)
Knowledge of personal computers and the Microsoft operating system is re-
quired to understand this user’s guide.
1.7
Proper use of the product
a)
KEB products may only be used for the applications described in the cata-
logue and in the technical documentation.
b)
If products and components from other manufacturers are used, these must
be approved by KEB.
c)
Proper transport, assembly, installation, storage, commissioning, operation
and maintenance are required to ensure that the product operates safely.
d)
The indicated environmental conditions must be observed.
e)
The information in this user’s manual must be observed.
1.8
Purpose of the user’s guide
a)
This user’s manual contains information based on the requirements defined
by DIN EN 62079 for mechanical engineering documentation.
b)
These operating instructions are intended for:
1.
Users
2.
Commissioning engineers
3.
Maintenance personnel
c)
Pay attention at the information in the chapter "Safety instructions".
d)
More information such as operating instructions, examples and reference in-
formation, are available in the online help of COMBIVIS studio HMI and
COMBIVIS connect.
1.9
The manual is a part of the system
a)
This user’s guide belongs to C6 HMI / C6 HMI LC and is also required for
commissioning.
b)
Keep all supplied documentation for the entire service life of C6 HMI / C6
HMI LC.
1.10
Figures
a)
This manual contains illustrations of the described devices.
b)
Some details of the illustrations may differ from the device provided.
Summary of Contents for COMBICONTROL C6 HMI
