22
PrODUcT DeScrIPTION
2 Product Description
The device series COMBIVERT F6 concerns to drive converters, which are optimized
for the operation at synchronous and asynchronous motors. The COMBIVERT can be
extended with a safety module for the use in safety-oriented applications. It can be
operated with a fieldbus module at different fieldbus systems. The control board has a
system comprehensive operating concept.
The COMBIVERT meets the requirements of the Low-Voltage Directive. The harmo-
for drive converter were used.
The COMBIVERT is a product of limited availability in accordance with
. This
product may cause radio interference in residential areas. In this case the operator may
need to take corresponding measures.
The machine directive, EMC directive, Low Voltage Directive and other guidelines and
regulations must be observed depending on the version.
2.1
Specified application
The COMBIVERT serves exclusively for the control and regulation of three-phase mo-
tors. It is intended for the installation into electrical systems or machines.
Technical data and information for connection conditions shall be taken from the type
plate and from the instruction manual and must be strictly observed.
The used semiconductors and components of the KEB Automation KG are developed
and dimensioned for the use in industrial products.
Restriction
If the product is used in machines, which work under exceptional conditions or if essen-
tial functions, life-supporting measures or an extraordinary safety step must be fulfilled,
the necessary reliability and security must be ensured by the machine builder.
2.1.1 residual risks
Despite intended use, the drive converter can reach unexpected operating conditions in
case of error, with wrong parameterization, by faulty connection or unprofessional inter-
ventions and repairs. This can be:
• wrong direction of rotation
• motor speed too high
• motor is running into limitation
• motor can be under voltage even in standstill
• automatic start
2.2 Unintended use
The operation of other electric consumers is prohibited and can lead to the destruction
of the device. The operation of our products outside the indicated limit values of the
technical data leads to the loss of any liability claims.
Summary of Contents for COMBIVERT 10F6 Series
Page 2: ......
Page 82: ...82 NOTES...
