GB - 7
Preface
1.6
Product description
The product family COMBIVERT S6 with safety function STO has been developed for the
use in safety-oriented applications. The basic standards as well as application and country-
specific standards must be observed furthermore. The standards referred in this manual must
be observed supplementary !
1.6.1 Overview of functions
The control provides the following functions:
• hardware-installed supply of digital and analog inputs and outputs.
• Diagnostic interface
•
Ethernet-based fieldbus interface (EtherCAT / Varan)
•
CAN fieldbus interface
• Multi encoder interface
• KTY interface
• Brake control
•
STO functionality
•
Status LED‘s
1.6.2 Safety function
The safety function STO according to IEC 61800-5-2 contains:
•
Safe torque off (Safe Torque Off - STO)
The safety function meet the requirements in accordance with performance level e (ISO13849-
1) and SIL 3 (IEC 61508 and IEC 62061). In case of proper project design, installation and
operation the safety function protects people against mechanical damages.
Attention
Validity of certificates
The certification of controllers with safety technology is only valid if the mate
-
rial number corresponds with the specified numerical code
und
the FS logo
is printed on the type plate.
Numerical code:
Steuerung mit STO-Funktion
eingesetzt in
Steller
1KF6Kxx-xxxx
Frequenzumrichter bis Gehäuse E
(x=variabel y=D, E)
xxF6Kxy-xxxx
2KF6Kxx-xxxx
Frequenzumrichter ab Gehäuse G
(x=variabel y=G…W)
xxF6Kxy-xxxx
Summary of Contents for COMBIVERT S6 Series
Page 2: ......
Page 32: ...GB 31 Notices...
