2.2
Specified application
T6
APD
is a modular inverter module system for the control and regulation of three-phase
motors, which was developed for the use in different vehicle classes.
The T6
APD
system is used for the electrification of auxiliary components e.g. in bus
-
es, municipal vehicles, construction machinery such as climate and air compressors,
hydraulic pumps for servo steering or for drive systems for attachments in the field of
agricultural machinery.
In connection with sine-wave filter plus / EMC or sine-wave filter with isolating transform
-
er there is the possibility of mains simulation for the operation of socket consumers. The
T6
APD
is intended for the installation in electrical systems or machines.
The T6
APD
is a product for commercial use with limited availability in accordance with
The T6
APD
meets the requirements of the Low-Voltage Directive. The harmonized stand-
for inverter modules is used. The harmonized standards
were used.
The machine directive, EMC directive, Low Voltage Directive,
and other guidelines and regulations must be observed depending on the
version.
Technical data and information for connection conditions shall be taken from the name-
plate and from the instruction manual and must be strictly observed.
Limitation
If the product is used in vehicles or machines, which work under exceptional conditions
or if essential functions, life-supporting measures or an extraordinary safety step must
be fulfilled, the necessary reliability and security must be ensured by the customer.
2.2.1 Residual risks
Despite intended use, the inverter module can reach unexpected operating conditions
in case of error, with wrong parameterization, by faulty wiring or non-professional inter-
ventions and repairs. This can be:
• wrong direction of rotation
• motor speed too high
• motor is running into limitation
• motor can be under voltage even in standstill
• automatic start
• overheating of motors
29
PRODUCT DESCRIPTION
Summary of Contents for COMBIVERT T6APD
Page 2: ......
