PRODUCT DESCRIPTION
8
2 Product Description
The Bluetooth-Adapter is used to connect KEB drive controllers, operators or controllers
with DIN 66019 interface via Bluetooth connection using the COMBIVIS mobile App.
The Bluetooth-Adapter is not a standard Bluetooth adapter. It can be used exclusively
for the communication with KEB devices with the interface specified above.The convert-
er must be plugged directly on the interface.
2.1 Intended use
The KEB Bluetooth-Adapter is exclusively for operation with KEB drive controllers or
operators. The operation of other electrical consumers is prohibited and can lead to the
destruction of the devices.
The used semiconductors and components of KEB Automation KG are developed and
dimensioned for the use in industrial products. If the product is used in machines, which
work under exceptional conditions or if essential functions, life-supporting measures or
an extraordinary safety step must be fulfilled, the necessary reliability and security must
be ensured by the machine builder.
Operating our products outside the limits specified in the technical data will result in the
loss of any claims for damages.
2.2 factory setting
The KEB adapter is delivered with the following settings (factory settings):
Settings
Values
Connection interval
8 ms
Slave latency
0
Advertising interval
20 ms
Baud rate (bps)
38400
Data bit
8
Parity No
Stop bit
1
Hardware flow control
No
Command mode via "COMMAND:"
Yes
Operating mode
Peripheral
Device name
KEB BLE XXXXXX (LAP BT address)
Connection Passkey
6 digits: 000000 -999999
Table 1:
Factory settings
