9 Inputs/Outputs settings
Chapter overview
Pictogram
Navigation
►Project tree ►Device setup ►Input/Output settings
Brief description
This chapter describes how the digital inputs and outputs, the
analogue inputs and outputs, and the motor brake output on
the ServoOne and ServoOne junior work and are configured.
Contents
9.5 Analogue outputs (option only for ServoOne)
9.6 Analog output (Option - MIO)
ID No.: 0842.26B.5-01 Date: 09.2020
ServoOne - Device Help
302
9 Inputs/Outputs settings
9.1 Inputs/Outputs settings
Image 9.1: “Inputs/Outputs settings” screen
The buttons on this screen can be used to access and configure the individual input
and output types.
Inputs
l
Before using the digital inputs, they are normally associated with a special
device functionality for
digital
inputs with the use of function selectors.
l
Likewise, before using the analogue inputs, these are normally associated
with a special device functionality for
analogue
inputs. The corresponding
function selectors also make it possible to select a special digital functionality
instead.
l
Two of the digital standard inputs on the device are what are referred to as
“touch probe inputs”. These inputs are faster than the other inputs.
