●
Tool fixation
The tool has many kinds for fixation.
A.
Push pins fixation
Fix the tool on soft wall.
1. Take out the push pins from the groove. (See Fig.2)
2. Determine the fixed place. Push the pin into the wall ( the hook upside). (See Fig.3)
3. Hang the tool into the pin, be sure it is adjust well. (See Fig.3)
B. Butyl rubber fixation
You can fix the tool on the wall which surface is slick or unconformable for push pins
fixing.
a)
Clean surface and keep dry.
b)
Stick the butyl rubber tape on the back of the tool.(see fig.4)
c)
Determine location for the tool on the wall and mark. Make sure the adhibit is firm.
●
Operation instruction
1.Determine the start place and laser direction on the level surface.
2.Fix the tool as per the starting place. (See “How to fix the tool”)
3. Press the on/off button to open the laser. When in unlock state, the tool will project the
horizontal and vertical laser line automatically(See Fig.5). Do not stare into laser beam,
see “ Warnings”)
3