●
Automatical leveling
1.
Automatically adjusting level function is only applied to the vertical wall and not
applied to the floor or other level surface.
2.
When operated on the surface of the wall, make sure the laser head is fixed upward.
When is on the unlocked position, the automatic level function is
±
8
°
. The tool can
automatically adjust level in this range.
3.
When is on the locked position, the tool won’t have function of automatic adjusting
level. (See Fig.6)
●
Tips:
●
The tool is only used to project line on the surface of the object where the tool is placed.
The tool is designed to project a baseline on the surface of the object. The reflection of the
baseline on any other surfaces cannot be used as a reference.
●
Operation instrument should be away from magnets or magnetic environment, so as not to
affect the results.
●
If the laser line is darken or not visible during operation, please check and replace the
battery.
●
The tool is recommended for indoor use. The visibility of the laser will be affected if the
tool is used outdoor.
4
