Battery safety tips
●
Please remove the battery when clean the product.
●
Please remove the battery when do not use the product for a long time.
●
Insert the battery with reference to the correct polarity.
●
Please dispose the waste battery reasonably: battery placed under the environment of high
temperature will cause the danger of explosion, please don't put the battery into the fire.
Please in the polarity of the battery with insulating tape,in order to prevent direct contact with
other objects. Many countries have regulations regarding battery processing. Please comply
with local regulations.
TOOL COMPONENTS
A
．
Level vials B
．
Laser outlet C
．
Push tab
D
．
Push pins E
．
Base F
．
Pointer
G
．
Alignment plate H
．
Protecting cover I
．
Battery Lid
J. On/off button
OPERATION INSTRUCTION
●
Battery installation
1. Make sure that the laser is at OFF state. (see Fig. 1)
2. Open the battery lid on the back of tool. (see Fig.2)
3. Insert a 9V block battery with reference to the correct polarity.
4. Put the battery to the compartment and close the lid.
●
Tool installation
Install the main frame on the base. (see Fig.3) Please take away the protecting covers when
use it.
2
