z
Then the area character"
"on the display will blink, Pressing READ key to take the area
result and display on the lower portion of the screen. At this moment, the "
" icon won’t
blink again. (Step 3);
z
Press the READ key again will toggle back and forth between the length and width, area
measurement result and corresponding icon "
" "
" and"
" will display
and blink with the frequency of 2Hz on the screen, meanwhile the measurement won’t work.
●
Press MODE key again to clear the data on the portion of the screen, then can begin the new
calculation of area.
Addition of area under area mode:
z
Press the M key to save the calculated area on the lower portion of the screen, at the same time,
the “M+” icon appears on the screen;
z
Press MODE key again to begin the second time measurement and computation (follow step 1, 2
and 3 under the area section);
z
After getting the desired area of the second time computation, press +/= to enter the addition
mode. A “+” icon would appear on LCD.
Note: If continuously press the +/= key for 2 times, the addition operation will be canceled and the
icon +/= will disappear (Press+/= key shortly for one time will enter into addition, Press+/= key
7
