3
B
．
camera head
C
．
Probe
D
．
probe connector
E
．
LCD screen
F
．
button
——
image rotation
G
．
on/off switch, LED brightness adjustment
H
．
battery compartment
I
．
button
——
zoom
Operation Instructions
●
Battery installation
1
、
Use a screwdriver to open the battery compartment.(as shown in Fig.4)
2
、
Insert one 9V alkaline battery(6LR61), close the lid and fasten the screw.(as shown in Fig.5)
●
Connect the probe to the main body
The main body must be connected to the camera probe. To connect the probe to the main body, make
sure the keyed ends are properly aligned. (Fig6). Once they are aligned, finger tighten the nut.
●
Accessories installation
A
、
standard 12mm probe accessories installation
The three accessories are showed in Fig 2 (mirror, hook and magnetic).
As showed in Fig.7, hold the camera head .Slip the semicircle end of the accessory over the camera
head . Then rotate the accessory 9
0°
into a fixed position, as shown in Fig.8.
