18
4.1.2.8
Defog
This function is suitable for outdoor foggy scene and after enabling it, the
camera is able to see through the fog.
Go to
Settings > Camera > Image > Image Enhancement
, select “Defog”
from the dropdown list of Image Enhancement and drag the slide bar of Defog
Sensitivity.
4.1.2.9
*EIS
EIS function is to prevent image flicker when the camera is zoomed in too
much.
Go to
Settings > Camera > Image > EIS
, select “Enable” from the dropdown
list of Mode and drag the slide bar of EIS Level.
4.1.2.10 Rotate and BNC
Go to
Settings > Camera > Image > Rotate and BNC
, select Mirror Mode
from the drop-down list, options including Left and Right, Up and Down, Center
and Disable. When the image is reverse, set through this menu.
*Some models also support corridor mode. Go to
Settings > Camera >
Image > Rotate and BNC
, select corridor mode from the drop-down list,
options including Left, Right and Disable.
Cameras with BNC output ports will be able to output analog images directly
after enabling BNC output.
Select BNC output mode from the dropdown list of BNC output, options
including PAL (25 frames) and NTSC (30 frames).
Picture 4-6 Rotate and BNC
4.1.3
Auxiliary Function
*
Wiper
Wiper is used to clean the dome housing. In the PTZ control part of the Live View
interface, Click
to start the wiper. Click
again to stop the wiper. The
wiper will stop automatically after 10 brushes. Click
to enable wiper again if
necessary.
4.2 Motion Detection
Detect movement features in the defined area. Once the movement exceeds the defined
sensitivity, an alarm will be triggered by Web Client.