26
the area, and drag the slide bar of
“
Sensitivity
” to set the sensitivity of the guard area to
moving objects;
5)
Time Threshold
: The system will trigger an alarm after the target entering the guard
area for a certain period of time, for example 5s. Time threshold can be configured and
the default is 5s;
6)
Duration
: Click the white bar behind each weekday and drag mouse to make a blue bar
as the task duration for that day. Select the blue bar and adjust or delete duration by
mouse. Check several weekdays or
“
Select All
” and click “
Copy
” to copy the defined
motion detection durations to the days
;
7) Check
“Linkage Type”
and
“Save”
to make settings take effect.
4.8 *Exit Guard Area
Enable this function in the interface to detect specific area at real time. Once any moving
object leaves the area, an alarm will be triggered.
Go to
Settings > Event > Intelligent Function > Exit Guard Area
and configure. Setting
steps can be referred to in
Enter Guard Area
.
4.9 *Object Left
Enable this function in the interface to detect specific area at real time. When any object is left
in the area, an alarm will be triggered.
Go to
Settings > Event > Intelligent Function > Object Left
and configure. Setting steps
can be referred to in
Enter Guard Area.
4.10
*Object Removal
Enable this function in the interface to detect specific area at real time. When any object is
taken from the area, an alarm will be triggered.
Go to
Settings > Event > Intelligent Function > Object Removal
and configure. Setting
steps can be referred to in
Enter Guard Area
.
4.11
*Gathering
Enable this function in the interface to detect specific area at real time. When moving objects
exceed the sensitivity, an alarm will be triggered. After setting the area and the sensitivity is
set 50%, when 50% or more of the area is covered by moving objects, an alarm will be
triggered.
Go to
Settings > Event > Intelligent Function > Gathering
and configure. Setting steps can
be referred to in
Enter Guard Area
.
4.12
*Audio Surge
After enabling this function, when there is audio surge, an alarm is triggered. The higher the
Voice Intensity Threshold is, the more sensitive it is to voice mutation.
Go to
Settings > Event > Intelligent Function > Audio Surge
.
Setting steps:
1) Check
“
Enable
”;
