28
Recording Linkage
: when an alarm is triggered, start video recording automatically. Need to
install a storage card.
Text Overlay
: when alarm is triggered, display alarm text on screen.
Snapshot:
when alarm is triggered, capture the image automatically. Need to install a
storage card.
Email Notification:
when an alarm is triggered, send an e-mail to the e-mail address
automatically.
Alarm Output
: it means linking to an alarm output device. It requires the camera to support
alarm output function and has connected with an alarm output device.
Note:
Go to
Settings > Network > Other Protocols > SMTP
to set the e-mail address. SMTP
(Simple Mail Transfer Protocol) is a group of rules for sending email from source address to
target address and it determines the transition method of email.
Picture 4-14 SMTP
4.13.1
Motion Detection Alarm Linkage
1) Enable Motion Detection, and set the detection area and sensitivity. Please refer to
Motion Detection for details.
2) Check the Linkage Type for motion detection. For example, if user checks Snapshot,
when alarm is triggered, the system will take a snapshot. In
Settings > Storage >
Snapshot
interface, user can set picture format, resolution, interval and quantity.
4.13.2
Tampering Alarm Linkage
1) Enable Tampering, and set the area and sensitivity. The method is the same as that
of Motion Detection.
2) Check Linkage Type.
Email address for sending alarm email
User name and password of SMTP server
Email address for receiving alarm email