29
3) Click
“
Save
”.
4.13.3
Alarm Input Linkage
Camera supports connecting with on-off alarm devices. If the alarm input device is
always disabled, when it alarms, the circuit will become a loop and the camera will trigger
alarm output by the set alarm linkage type. If the alarm input device is always enabled,
when it alarms, the circuit will become open and the camera will trigger alarm output by
the set alarm linkage type.
Setting steps:
1) Confirm that the alarm input device is always enabled or always disabled and has
been rightly connected with the alarm input port of camera.
2) Go to
Settings > Event > Alarm Input
, and select a number from the dropdown list
of Alarm Input ID (corresponding to the connected input ID).
3) Enter alarm name. If the alarm input device is always disabled, which means the
circuit is usually open, user must select
“
Always Disabled
” from the dropdown list of
Alarm Type. If the alarm input device is always enabled, which means the circuit is
usually loop, user must select
“
Always Enabled
” from the dropdown list of Alarm
Type. The default setting is
“Always Disabled”.
4) Duration: Click the white bar behind each weekday and drag mouse to make a blue
bar as the task duration for that day. Select the blue bar and adjust or delete
duration by mouse. Check several weekdays or
“
Select All
” and click “
Copy
” to
copy the defined motion detection durations to the days;
5) Check
“
Linkage Method
”
.
6) Click
“
Save
”.