41
Note: For cameras with HD-SDI output, when BNC is enabled, the web client will stop
image output.
5.4 User Security
5.4.1
User Management
Go to
Settings > System > User Security > User
.
Add:
Click
“
Add
”, and enter user name and password in the popup interface. Select user
type from the dropdown list, and assign operation rights to newly added user from
the Authorization List. After setting, click
“Confirm”.
Picture 5-5 Add user
Note: It is suggested to set complicated password in the form of combination of
8~16 digits, case-sensitive letters or special symbols. The system will judge the
password strength according to the complexity of the password. Only when the
password strength being
“Good” or “Strong” can the setting be successful.
Delete:
Select user IP and click
“Delete” to delete the user.
Modify:
Select user IP and click
“Modify” to modify in the popup interface.
5.4.2
IP Filter
By setting IP address filtering, user can manage access limitation to the web client.
White List includes IP addresses able to access to the client, while Black List
includes IP addresses unable to access to the client.
Enable:
Select filter method from the dropdown list according to request, or select
“Disable”
to disable IP filter.
