4
1.5 Configuration
To save preset positions. It needs to be used in groups. Please refer to 1.6.4.
Press [MODE] to switch between scheduling mode and direct connection to camera.
Confirm input.
When connecting to camera directly, group with number keys to display single video
source in full screen.
When connecting to camera directly, press [MULT] to switch to 20-view layout.
To display video source on video wall. Need to group with number keys. Please
refer to 1.6.1.
When connecting to camera directly, press [MON] to switch to 9-view layout.
To display video source on video wall. Need to group with number keys. Please
refer to 1.6.1.
PRESET
SHOT
MODE
CLEAR
ENTER
WIN
MON
MULT
CAM
EVENT
AUX1
AUX2
AUX3
AUX4
BWD
FWD
preset position
shot
mode
back/delete
confirm
window
monitor/
switch layout
switch layout
camera
scheme on wall
switch page
stop
pause
switch page
previous
camera image
next camera
image
Under scheduling mode of the VMS, the image of the video wall switches to
that of the next camera on the list.
Under scheduling mode of the VMS, the image of the video wall switches to
that of the previous camera on the list.
When connecting to camera directly, switch to next page.
Reserved.
Reserved.
When connecting to camera directly, switch to previous page.
Display scheme on video wall. Need to group with number keys. Refer to 1.6.2.
To save or load preset positions. It needs to be used in groups. Please refer to
1.6.4 and 1.6.5.
Delete input values; cancel operation.
1. Modify keyboard IP address. Search current keyboard IP address through IpConfig.exe and select the
keyboard to be edited. Click IP setting to configure IP address, subnet mask and gateway.
