GENERAL
Thank you for choosing our masonry stove!
Keddy's masonry stoves have a number of unique characteristics, for example:
* Flat-ground hatches
* Good heat storage
* Cast iron and concrete for long service life
The Keddy K20 has the following accessories:
* Outdoor air connector
* Fire walls
* Fan unit
* Floor plate
* Floor stone
Important! These installation instructions and the associated firing instructions must be saved!
Quality approval
Keddy's masonry stoves are tested by a certified testing institute and comply with the requirements in the
Swedish Building Regulations and for CE Marking.
Manufacturer's Declaration
Keddy's masonry stoves have been manufactured in accordance with the documents that form the basis for
the respective certificates and their associated requirements for production inspections.
IMPORTANT POINTS
* Contact the Planning and Building Committee in your municipality concerning the building notice.
* It is also recommended that you contact a certified chimney sweep prior to installation.
*
NOTE! Read through all of the installation instructions before beginning the installation.
* Make sure that you get the right dimension and length of the flue, see p. 4.
* The installation has to be inspected by a certified chimney sweep before you start firing.
* In order for the warranty to apply, it is important you follow the care and firing instructions carefully, see
pages 10-11.
* WARNING! Parts of the masonry stove become very hot during operation and may cause burn injuries if
touched.
* To guarantee the function and safety of the masonry stove, we recommend that a professional perform the
installation. Our dealers can recommend suitable fitters. You can find information about our dealers on www.
keddy.se.
- 3 -