LSO010
Issue 01
PLEASE BE ADVISED:
Before assembling the Ladder Stand off for the first time, it is highly
recommended that Installers familiarize themselves with the component parts and carry out a test
assembly and disassembly in a safe area away from the point of final installation. All component parts
detailed in the operating instructions must be used in the assembly of the system. Should a piece be
missing or appear defective do not continue to assemble and contact Kee Safety immediately.
Step 1 Step 2
Ladder stand-off ready for attaching to the Ladder.
Position the ladder stand-off over the top end of the ladder ensuring
the hooks are pushed firmly over the rungs.
Step 3 Step 4
FIG 1. Access Corners
Pull the spring hook over the second rung ensuring it’s firmly
secured into position.
WARNING!
It is very important this spring
hook is fixed into position before use, as it prevents the Ladder
stand-off sliding off the top end of the Ladder.
Position the Ladder against the wall or to access corners FIG 1.
Step 5
Use Ladder spurs supplied by Easi-Dec to aid stability and prevent
outward slip.
Remember
Work carefully – Never rush.
Always fit the spring hook.
Do not use in adverse weather conditions.
Always erect using the 4:1 rule.
Dismantle: Reverse the above procedure
.
