4
TESTING & CERTIFICATION
Tested in accordance with the following (See Specification
Section for full details) :-
EN 13374 Class A.
EN ISO 14122 Part 3 & Part 4
OSHA
ANSI
Ontario Building Code, NBC and British Columbia Building Code
Canadian Standards Association
Canada Occupational Health and Safety
LIFE CYCLE TESTING - BS 6375-2:2009 Clause 6.5 - Opening and
closing of Gate through 90 degrees.
SALT SPRAY TESTING - ASTM B117 - 11 - 55 over 200 hours to
assess performance of coating to resist corrosion.
OFFICIAL DOCUMENTATION
All Systems comply with the following:-
Work at Height Regulations.
HSG 33 “Health & Safety in Roof work”
HSE Construction Sheet No. 21 “Working on flat roofs
protection against falls.”
European Union Directives together with requirements of CDM
Regulations. USA & Canada.
AESTHETICS
The smooth lines of the standard galvanized finish can be
further enhanced by the application of powder coating to
EN 13438.
USA-AAMA 2603-2605.
SYSTEMS DISTRIBUTORS
KEE GATE is available as a supply and installation service or
component supply only. Products are available from Kee Safety
directly or one of its licensed distributors.
System Overview
