8
G.
Establish the additional distance required so the striking
plate strikes the required post.
J.
To tension the hinge loosen the locking nut as shown.
I.
Once the gate is lined and levelled tighten the hex nuts and
bolts on the top & bottom guardrails using a 3/16” Allen Key
and ½” socket.
H.
Extend the gate by pulling to the required distance.
F.
To extend the gates width to the required opening simply
loosen the hex nuts and bolts on the bottom guardrail using a
3/16” Allen Key and ½” socket.
K.
Manually open the gate at 45 degrees from its closed
position.
Mounting and tensioning single gate spring
