13
English
1. Teaching Mirror (P)
To enable the Keeler Vantage to be used with a teaching
mirror, the teaching bi-mirror attachment must be fitted
as follows:
a. Remove the posidrive screws
from the panel beneath the front
window with the screwdriver
supplied. (Fig 4)
b. Fit the Mounting Bar with the pin
pointing to the right and secure
with screws removed in step 1
(Fig 5)
c. Slide the Teaching Mirror onto
the pin on the Mounting Bar. The
bi-mirror can now be swivelled
up and down.
d. To remove, slide the teaching
mirror to the right of the pin and
return to its case leaving
mounting bar in position (Fig 6).
To make the Teaching Mirror
Non-Removable for security
purposes proceed as follows:
Remove the posidrive screws as
in
(a) above.
Fit the Mounting Bar as in
(b)
above but replace screw on left
side only.
Fit the Teaching Mirror as in
(c)
above.
Accessories
Fig 4
Fig 5
Fig 7
Fig 6
