8
English
Comfortable Fit
Adjust the size (A)
fig.1 and the height (B) fig.2, so that the
instrument is supported comfortably around and on top of the
head.
Ophthalmoscope Angle Alignment
For vertical alignment of the eyepieces and binocular block (R),
adjust the height of the Metal Outer Brow Bar (C) if necessary
by using the browband tension knobs (D) located on the sides of
the headset (Fig 3).
Position the Binocular Block (R) as close to the eyes or
spectacles as possible for maximum field of view. Slightly
loosen the hinge mechanism control (E) knob to allow for
adjustment and tighten when in position as in (Fig 4).
For further instructions see page 110
How to use an Indirect Ophthalmoscope.
Using the Vantage
fig 4
fig 3
fig 1
Headband Adjustment
fig 2
