8
ADVANCING PRESETS ON THE FLY
Advance through Preset Banks by holding both
stomp switches for 1/3 of a second (or simply use the
mini toggle switch).
TO TOGGLE BACK AND FORTH
BETWEEN PRESETS
1. Tap the FDBK knob to enter ‘Preset Mode’
2. Cursor left or right through Preset Banks 1-4 by
then tapping either the A or B Side stomp switch.
3. Once you have landed on the Preset Bank you’ve
decided on, press both stomp switches again (or tap
the FDBK knob) to change to the desired Preset Bank.
SAVING PRESETS
1. Once desired changes are made, tap the FDBK
knob to enter ‘Preset Mode’.
2. Use the A and B stomp switches to cursor both
forward and backward through Preset Banks 1-4.
3. Once the desired Preset Bank is selected, hold
either the A or B stomp switch to save your settings.
Note: You can also use the mini toggle to advance
through Preset Banks 1-4.
The three lights in the middle of the HALO are Preset
Bank indicators, which will correspond with the
currently active Preset Bank.
When in Preset Bank 4, all three lights are illuminated.
Use your foot to control Sides A and B, or both at the same time.
You can even use your foot to press the slightly elevated FDBK knob!
CHANGING AND SAVING PRESETS
The HALO features a total of 4 Preset Banks
Summary of Contents for HALO
Page 1: ...INSTRUCTION MANUAL...