KeyGrabber Nano
Copyright © 2013 KeeLog
11
Configuration options
The
KeyGrabber Nano
may be configured through the file CONFIG.TXT, placed in the Flash
Drive root folder. Use any text editor to prepare such a configuration file, containing the
following text:
Password=KBS
LogSpecialKeys=Medium
DisableLogging=No
Copy this file to the root folder in Flash Drive mode. The new configuration will be loaded on
next power-up.
The following list presents the most common configuration options. All variable and value
strings are case insensitive.
Password
sets the 3-key combination for triggering Flash Drive mode. Any three-letter key
combination is allowed (sequence is irrelevant). The password setting is national-layout
independent. Default value is
KBS
.
LogSpecialKeys
sets the logging level for special keys, such as Enter, Escape, F1...F12 etc.
Special keys are logged in brackets, i.e. [Ent]. Allowed values are
None
(only text is logged),
Medium
(text with basic function keys are logged), and
Full
(text with all special keys are
logged). Default value is
Medium
.
DisableLogging
allows to disable keystroke logging, however does not affect mode
switching. Allowed values are
Yes
(logging disabled) and
No
(logging enabled). Default value
is
No
.
DisableLayout
allows disabling the currently loaded layout, without having to delete the
layout file. Allowed values are
Yes
(layout disabled) and
No
(layout enabled, if present).
Default is
No
.
