SerialGhost Wi-Fi
Copyright © 2013 KeeLog
18
On-demand access
The
SerialGhost Wi-Fi
offers on-demand access via TCP/IP from any computer connected to
the network. This feature is usually limited to the Local Area Network, unless your local
network segment is visible globally. To access the logger remotely, launch
KL Tools
, select
the proper device version, and navigate through the wizard to remote access. The
Wi-Fi
Control Center
will be shown.
A remote device needs to be added first. This can be done by clicking the
Add Device
icon,
and supplying the IP address, name (optional), and device password. The password must
match the local 3-character combination defined in the devices CONFIG.TXT (K, B, S by
default).
The IP address of the remote device can be obtained in a few ways:
from an E-mail report (see section
E-mail reporting
)
from the device configuration (if using static IP)
from the Access Point configuration (if using Auto-IP)
If the IP address is unknown, the
Search Local Network
option can be used. This feature will
send a broadcast signal to all devices in the Local Area Network, to which remote loggers
