SerialGhost Wi-Fi
Copyright © 2013 KeeLog
21
Clock configuration
It is necessary to configure the built-in clock module for getting correct date and time-stamps.
This task can be performed by
KL Tools
(recommended), or can be done manually.
To configure the internal clock using
KL Tools
,
launch the application, select the device model,
and choose to configure the device. The
application will display a time and date
configuration dialog. Make sure date and time
stamping is enabled, and that the
Set time and
date
checkbox is clicked. Select the desired
time format, and move to the succeeding
dialogs.
KL Tools
will guide you through enabling Flash
Drive mode, and placing the configuration file
TIME.TXT on the internal flash disk.
The clock can also be configured manually, without using
KL Tools
. To do this, a text file
named TIME.TXT should be prepared with the following format:
Year=2010
Month=4
Day=1
Hour=12
Minute=34
Second=56
Format=PM
The fields should contain the current time and date. The field
Format
allows distinguishing
between A.M., P.M., and 24-hour time (use the value
AM
,
PM
, or
24
). After the file has been
prepared, switch to Flash Drive mode and copy the file TIME.TXT to the root folder of the
flash disk. The USB Key delivered with the device has to be used to switch to Flash Drive
mode.
