12
network via Wi-Fi, and the setup steps are as follows:
①
Enter the user setup page, or enter the super setup page, and find [Wi-Fi
Network];
②
Start the WLAN (Wi-Fi) function of the system, and search for the
available Wi-Fi.
③
Select the available Wi-Fi, and enter the password.
④
Click the [Connect] button until the Wi-Fi connection is successful.
2. Charging Setup
*The operation steps for the setup of [Minimum Electricity Consumption] of
the robot are as follows:
①
Enter the super setup page.
②
Click the [Power Management] menu and the power management setup
page will be displayed.
③
Slide the page upward, find and click [Minimum Electricity
Consumption].
④
Select or input the numerical value, and save it.
Note: If there’s no charging pile, directly skip to [
3. Adjust the Volume
]
*The operation steps for the setup of [Automatic Recharging Electric
Quantity] of the robot are as follows:
①
Enter the super setup page.
②
Click the [Power Management] menu, and the power management setup
page will be displayed.
③
Slide the page upward, find and click [Automatic Recharging Electric
Quantity].
