18
Charging
1.
Charging by Adapter
(It’s not allowed to operate the robot during the
charging process by adapter)
①
Open the silica gel casing outside the [Manual Charging Port] at the back
of the robot, and use the charging plug of adapter to connect the robot.
②
After the successful connection, the indicator light of the adapter turns red,
and the screen interface skips to the charging page, indicating that the
charging is in progress.
③
When the indicator light of adapter turns green, it indicates that the
charging is completed. Please disconnect the adapter and tuck back the silica
gel casing outside the charging port of the robot.
2. Intelligent Autonomous Recharging of the Robot
The robot has the intelligent autonomous recharging function. When the
following three conditions are met, the robot can realize the intelligent
autonomous recharging.
The user has bought the charging pile, and the charging pile has a fixed
position and favorable energization.
The electric quantity of the robot is lower than the value of recharging
electric quantity set by the user.
The robot is outside the working period, and its electric quantity is
lower than 100%.
Please refer to the “Charging Setup” in the setup part of this Manual for the
setup of triggering condition of autonomous recharging.
