This KEEPER
®
Winch is equipped with a series wound, 12 Volt DC motor and is designed for
INTERMITTENT GENERAL DUTY USE.
This electric winch is similar to most electric motor driven tools and
should not be allowed to become overly hot. Stop winch if motor starts to labor or end of motor becomes
hot to the touch. Stop winching and allow motor to cool down. Minimum electrical requirements are 60 amp
alternator and battery with 650 CCA (cold cranking amp) capacity. This Winch
(FIGURE 2)
is not intended
for use in lifting/hoisting applications and the manufacturer does not warrant it to be suitable for such use.
The Freespool Clutch disengages the gearbox to allow the wire or synthetic rope to be pulled out without
using electric power. A Remote Switch with 15’ lead and wireless switch allows a wide variety of mounting
options.
General Description
SLOPE*
10% (5.7o)
20% (9o)
40% (18o)
60% (27o) 100% (45o)
Rolling Load Capacities (1st Layer)
*SLOPE: a one (1') rise over ten (10') feet in length equals a GRADE of 10%. A 10% grade is equal to a 5.71o incline
angle. A 100% grade equals a 45o angle of incline.
FIGURE 2
Wireless Switches (2)
15’ Handheld Switch
Battery Leads
4-Way
Roller Fairlead
(KX9.5)
Lbs.
48,450
32,400 20,900 16,150 13,600
Kgs.
22,980
14,700
9,480
7,320
6,170
*MOUNTING PLATE NOT INCLUDED
Aluminum
Hawse Fairlead
(KX9.5S)
KX9.5 Shown
*BATTERY NOT INCLUDED
Line Pull Lbs. (kg) Line Speed FPM (MPM) Motor Amp Dr Pull By Layer Lbs. (kg)
0
28.3 (8.6)
80
1 @ 9500 (4310)
2000 ( 907)
16.6 (5.1)
160
2 @ 8075 (3662)
4000 (1814)
12.2 (3.7)
220
3 @ 6864 (3113)
6000 (2722)
9.8 (3.0)
260
4 @ 5834 (2646)
8000 (3629)
8.1 (2.5)
310
9500 (4310)
4.2 (1.3)
360
12V DC PERFORMANCE
4
Summary of Contents for KX9.5
Page 43: ...Notes 43...
