THIS PRODUCT IS NOT INTENDED FOR LIFTING / HOISTING
Winch Installation
Correct installation of your Winch is required for proper operation. Installation should be on a flat surface
following the bolt pattern shown in
FIGURE 1.
Read and follow directions carefully to ensure proper Winch alignment and trouble free operation.
This Winch
MUST
be mounted with the rope in the under-wind direction
(FIGURE 8)
.
MUST
use only genuine Keeper Winch replacement Wire Rope part number
KWA14520 or Synthetic Rope part
number KVA10041S
.
!
!
WARNING
Improper mounting could damage your Winch
and void your warranty.
Step 1
Mount the Winch to the mounting kit base plate, proper mounting bolts are supplied. If using the Roller
Fairlead or Hawse Fairlead included, install now to mounting plate. You may need to remove one or more of
the rollers on the roller fairlead to pass through the wire rope. After doing this you may now attach the clevis
hook. See
(Figure 8)
for order and bolt direction.
!
!
WARNING
DO NOT EXCEED THE RATING OF YOUR RECIEVER HITCH
Mounting Plate
4-Way
Roller Fairlead
Wire Rope or Synthetic Rope
Under-wind Direction
Does not include Mounting Plate (KWA14622)
FIGURE 8
Aluminum Hawse
Fairlead
7
Summary of Contents for KX9.5
Page 43: ...Notes 43...
