K90-KPCS-IM-2
18/04/22
- 22 -
Important
: This start-up information should be completely filled in on each installation and remain
with the unit as
a permanent record for future reference.
PLEASE PRINT LEGIBLY
START-UP INFORMATION
Name & address of installation
________________________________________________________________________________
______________________________________________________________________________________________________________
_______________________________________________________________________________________________________________
Name, address, phone & fax # of Installing contractor
__________________________________________________________
_______________________________________________________________________________________________________________
_______________________________________________________________________________________________________________
Type of System (Cooler, Freezer, etc…) ___________ Design Box Temperature_________°F
Condensing
Unit System
start-up
date_____________
Unit model # __________________________________
Unit serial # _____________________
Compressor model # ____________________________ Compressor serial #_______________
Evaporator(s)
QTY _______
Unit model # ____________________________ Unit serial # ____________________________
Unit model #____________________________
Unit serial #____________________________
Evaporator(s) unit electrical rating:
Volts__________Phase__________Hz __________
Voltage at evaporator terminals:
L1/L2___________ L2/L3 ____________ L1/L3__________
Amperage at evaporator:
L1___________ L2____________ L3______________
Expansion valve - Manufacturer____________________________ Model # ____________________
Evaporator drain line trapped outside of box____Yes _____No
System Conditions
(Record just before desired box temperature is reached)
Refrigerant Type______Total Charge_______System evacuation # of times_____Final micron _____
Ambient at start-up ______°F Operating box temperature______°F
Thermostat setting ______ °F Defrost settings ______ / day
Minutes fail safe ______
Condensing unit electrical rating:
Volts__________Phase__________Hz __________
Voltage at compressor terminals:
L1/L2___________ L2/L3 ____________ L1/L3__________
Amperage at compressor:
L1___________ L2 ____________ L3 ___________
Compressor discharge pressure__________psig
Compressor suction pressure__________psig
Discharge line temperature at compressor_____ °F Suction line temperature at compressor_____ °F
Superheat at compressor ___ °F
Suction line temperature at evaporator TX valve bulb_____ °F Superheat at evaporator______°F
Comments
:________________________________________________________________________________________________
___________________________________________________________________________________________________________
___________________________________________________________________________________________________________
___________________________________________________________________________________________________________
___________________________________________________________________________________________________________
