Summary of SMS commands
Command
SMS form
Description
Set of authorized num-
bers
123456A1,number
123456A2,number
123456A3,number
123456A4,number
123456A5,number
A1,A2.A3 are main SOS
numbers, A4 and A5 are
numbers with call possibility
by pressing the button. Use
international form “+xxx”
Delete of authorized
numbers
123456A1,D
123456A2,D
123456A3,D
123456A4,D
123456A5,D
A1,A2.A3 are main SOS
numbers, A4 and A5 are
numbers with call possibility
by pressing the button.
Switch to mode “listen”
123456U1
(fabrical settings)
Device accept call, and user
is allowed to listen to what
is happening around the
device (one way communi-
cation)
Switch to mode ”call”
123456U0
Device accept call, and user
is allowed to make ordinary
call (two way communica-
tion)
Switch to mode “listen”
when press the SOS
button
123456U2
After pressing the SOS
button, the device will call
the authorized numbers (you
are allowed to listen to what
is happening around the
device - one-way communi-
cation)
Switch to mode “call”
when press the SOS
button
123456U3
After pressing the SOS but-
ton, the device will call the
authorized numbers (you are
allowed to make ordinary
call - two-way communica-
tion)
Demand on position by
SMS
123456F
The device will respond with
the current position (latitude
and longitude)
Alarm - over speed
123456Jx,yyy
x = 1 (turn on) , x = 0 (turn
off)
yyy - speed in km/h (three
digits form - 70km/h = 070)
Time zone set
123456Lxyy
x = + (east) , x = - (west)
yy - time zone (two digits
form)
Alarm - low battery
123456Nx,yy
x = 1 (turn on) , x = 0 (turn
off)
yy - critical value of battery
in % (enter always in two
digits form - 25% = 25), set
value must be lower then 45
Access code change
123456H999999
Always enter the 6 digit code
made up of numbers, the de-
vice will not accept any other
symbols or forms
Device reset to factory
settings
RESET!
Reset the device to fac-
tory settings. Resetting the
device does not reset the
password on the basic setup
(123456). The device does
not respond after reset with
any SMS
Remote device restart
RESET!1
Restart the device remotely
Device info
123456G
After sending the command,
device sent SMS with infor-
mation about settings
keetec sat 3000
personal tracker User ManUal
eN
Alarm - over speed
By this setting enter the maximum speed at which the device may move. Beyond the set value, the
device will send an SMS with the text „Over speed“ with GPS information to the authorized numbers
A1, A2 and A3.
This function can be turned On/Off and adjusted by SMS message
SMS form
123456J0/J1,speed
- J1 (turn on), J0 (turn off), speed (three digits form, km/h)
Example
123456J1,070
Alarm - low battery
By this setting you enter critical value of battery when the device will send an SMS message with a low
battery warning. The value must be less than 45 and must be set as two-digit number.
This function can be turned On/Off and adjusted by SMS message
SMS form
123456N0/N1,bat
- N1 (turn on), N0 (turn off), bat - critical value of battery (two digits form, %)
Example
123456N1,30
Time zone settings
SMS form
/-xx
- + (east), - (west), xx - time zone (two digits form)
Príklad
01
Speaker settings when calling
By pressing the CALL1 button during call you can increase the volume of speaker. By pressing CALL2
button during call you can decrease the volume of the speaker.
PC software for SAT3000
Ask your dealer for software.
TechnicAL pArAmeTers
Network
GSM/GPRS/GPS
Power supply/charging
Battery 1730mA/USB
Battery life - offline mode
up to 200 hod
Battery life - online tracking
48 hours (20sec interv.)
Dimensions
65mm x 40mm x 18mm
Weight
50g
Working temperature
from -20°C to 55°C
Humidity
non-condensing
from 5% to 95%