7
English
- turn the ignition off. If the security mode is not active, siren will sound 2 times and LED
diode will glow permanently. Valet mode is now active. If security mode is active, LED will
start to flash slowly. Enter the security mode. If you´ve entered correct PIN code, siren will
sound 2 times and LED will glow permanently. Valet mode is now active.
Deactivating of valet mode
- turn the ignition on a push the service button 2 times within 8 seconds.
- turn the ignition off. Siren will sound 2 times and LED will stop glow. Valet mode is now
deactivated.
IV. ENTERING THE SECURITY MODE
- You will enter to security mode by entering the 4 digit PIN code. If the security mode is
active. Led will start to flash slowly when programming.
- if the LED will flash so many times which is the value of first PIN number, push the service
button one time. LED will start to flash again.
- if the LED will flash so many times which is the value of second PIN number, push the
service button one time. LED will start to flash again.
- if the LED will flash so many times which is the value of third PIN number, push the service
button one time. LED will start to flash again.
- if the LED will flash so many times which is the value of fourth PIN number, push the
service button one time. LED will start to flash again.
V. CHANGE THE PIN CODE
PIN code change is possible only when security mode is active (function F9).
- turn on the ignition and press the valet button 10x within 10 seconds.
- turn off the ignition. Enter the security mode. If correct PIN code was entered, siren
sounds 1x and LED diode will stop glowing. You are now in PIN programing mode.
- LED will start to flash slowly and you can enter new PIN code.
- when the LED flashes so many times, which is the new value of first PIN code number,
push the valet button one time. First code number is saved and LED will start to flash
again.
- repeat this step for the second, third and fourth PIN code number.
- 5 seconds after entering the fourth code number LED diode will show the new
- PIN code with the number of flashes with 2 seconds pause between every code number.
- turn the ignition on or wait for 10 seconds after showing the new PIN code and system
will automatically end the PIN code programming mode.
Note: Keep your new PIN code in safe. In case of lost please contact your dealer.
