无线参数
2.4GHz
支持波束成形技术
无线信道: 2.4GHz Channel: 1,2,3,4,5,6,7,8,9,10,11,12,13
调制方式:
速率集: MCS0~MCS15
接收灵敏度: 11Mbps:≤-90dBm,54 Mbps:≤-72dBm,
HT20 MCS7:≤-69dBm
11b: DSSS: DBPSK(1Mbps),DQPSK(2Mbps),
CCK(5.5/11Mbps)
11g: OFDM:BPSK(9Mbps),
QPSK(18Mbps),16QAM(36Mbps),
64QAM(54Mbps)
11n: MIMO-OFDM:BPSK,QPSK,16QAM,64QAM.
11
‘KSLINK123456’, then your hidden network would be ‘KSLINK123456 X’. The ‘X Password’ for this network is located
on the label at the bottom of your kisslink router. Simply connect in the same way you would with a traditional WiFi
network. Finally, you can also use the kisslink App to connect devices. It has a feature to approve, forget, ban, or
even set time limits on devices.
Do devices need to be authenticated each time they connect to the kisslink network?
No. Unless you specifically set a time limit for devices for your network via the kisslink App, devices only need to be
authenticated once for continued access to the kisslink network.
I cannot connect to the hidden KSLINKX network with my ‘X Password’. What can do I do?
We recommend downloading the kisslink App. You can easily unhide the KSLINKX network as well as change the default
password to one of your choosing. If you do not wish to download the App on your mobile device, we’ll be able to help as
well. Please first ensure that you’ve correctly entered the SSID for the hidden KSLINKX network (KSLINK****** X) as well
as the ‘X Password’ shown on the bottom your kisslink router. If the network cannot be accessed, please send an email
titled “X Password Inquiry” to support@keewifi.com with the MAC address located on the label at the bottom of your
kisslink. We will be able to provide you with your unique default password as well as help you troubleshoot any other
problems you may have.
The LED light around kisslink is turned off. What’s going on?
By default, kisslink turns off its standby LED light at night from 22:00 to 7:00. This feature is to ensure that the LED light
does not interfere with your sleep. It can be changed in the kisslink App.
My devices have full WiFi signal, but it seems they are not connected to the Internet. What can I do?
This issue is typically caused by a kisslink in range extender mode being placed too far away from the existing router.
Always make sure to place kisslink in area that overlaps the existing WiFi network to ensure that it is able to receive an
adequate signal. It is best to place kisslink in between an area with strong WiFi coverage and an area where you wish to
expand that coverage.
操作系统: 基于Linux深度定制的智能路由器操作系统NBOS ROM
支持Android、iOS系统的路由器管理软件
支持语言: 简体中文，英文
高级管理: 面向高级用户/开发者提供路由器API和SDK（开发中）
无线安全: kiss碰触授权控制，WPA-PSK/WPA2-PSK加密，无线
访问控制，SSID隐藏
开放平台: 提供第三方开发者插件开发工具及上层API（开发中）
管理应用: 支持Android、iOS
软件参数
说明书*1
保修卡*1
电源适配器（5V/1A)*1
1.5米扁平电源线*1
1.5米6类纯铜扁平网格线*1
产品配件
11
11
