User Manual for
HOT DRAFT®
8510 Miralani Dr.
San Diego, CA 92126
(888) 980 - 4810
support@kegco.com
d
11
3.
Place a mug under your Hot Draft® faucet. The Hot
Draft® faucet is the faucet closest to the Control Panel
(see
Assemble the Hot Draft®
Dispense System
in the
Installation Instructions). Open the Hot Draft® faucet to
begin heating up your beverage. The Main Screen will
display the messages “Please Wait…” and “Unit
Heating”. This indicates that your Hot Draft® Tower is
heating the beverage up to the setpoint temperature.
Keep the faucet open while the unit is heating the
beverage. The Hot Draft® Tower may drip out
underheated beverage during heating. This is normal;
keep a mug under the Hot Draft® faucet to catch these
drips. Heating may take up to 10 seconds.
4.
The Hot Draft® Tower will begin dispensing your heated
beverage from the Hot Draft® Faucet when the
beverage is within 10°F of the setpoint temperature.
The Main Screen will display the message “Pouring”.
Note: The Hot Draft® Tower should be able to pour at
least a 12 oz cup of heated beverage without stopping.
If the Hot Draft® Tower pauses during a 12 oz pour, it
will need to be fine-tuned for your specific beverage.
See the next page for
Fine Tuning your Hot Draft®
Tower System
.
