Installation Guide for
HOT DRAFT®
https://kegco.com/pages/patents
8510 Miralani Dr.
San Diego, CA 92126
(888) 980 - 4810
support@kegco.com
23
NAVIGATING YOUR HOT DRAFT® TOWER
When you first plug in your Hot Draft® Tower, the LED Display will show the
Main Screen with the message “Starting Up”.
The display panel includes several other features to operate and control the Hot Draft® Tower.
Accessing the Service Menu
To open the Service Menu,
hold the “
SEL
” button for
3 seconds while in the Main Scree
n. Use “Up” and “Down” to display
other menu options in the Service Menu.
NOTE:
To exit the Service Menu, you must navigate to either the “FLOW”, “PWM”, “IN/OUT”, or “VERSION” screens and
press “SEL”. You cannot exit the Service Menu from the “SETPOINT”, “PURGE”, or “CLEAN” screens.
SETPOINT
"SETPOINT”
will display and allow you to change the setpoint temperature. When you first plug in and install this product,
the default temperature will be 165F
. To edit the setpoint temperature, press “SEL” and a
* will appear next to the
temperature. * indicates that the temperature can be changed.
Each press of either “Up” or “Down” will increase or
decrease the temperature incrementally by one degree Fahrenheit, between 140
–
180 degrees Fahrenhei
t. Press “SEL”
to lock the temperature, at which point the * will disappear.
NOTE: Different beverages have different optimal pouring temperatures. Choose the best temperature for your needs.
