background image

 

User Manual for

 

HOT DRAFT®

  

 

 

8510 Miralani Dr.  

San Diego, CA 92126 

(888) 980 - 4810 

support@kegco.com 

 

15 

CLEANING AND MAINTENANCE FOR YOUR HOT DRAFT® TOWER 

Regular cleaning and maintenance of your Hot Draft® Tower is key to ensuring peak performance over time. Kegco offers 
a full line of cleaning products to keep your draft lines free of contaminants that may affect your beverage flavor and flow. 
Use Kegco chemical solutions, cleaning containers, and cleaning accessories with your Hot Draft® Tower to best maintain 
original beverage flavor and peak heating performance. 

Chemical Solution

 

Only use chemical solutions specifically designed and manufactured for beer line cleaning. Only chemicals specifically 
designed for beer line cleaning will dissolve the build-up of reside in your lines without leaving behind any harmful 
residue. Completely follow all safety instructions and directions included with your cleaning chemical solutions. Contact 
Kegco at (888) 980-4810 or visi

www.kegco.com

 for more information and placing an order. 

To clean lines used to dispense beverages such as coffee or tea, we recommend ALC Acid Post Wash Beer Line Cleaner. 
This solution will descale calcium deposits which may build up in your lines due to high calcium brewing water. This 
cleaner is specifically formulated to protect metals, such as those used in the Hot Draft® heating components, from 
potent acids found in this product.  

To clean lines used to dispense beverages such as beer or kombucha, we recommend Kegco Beer Line Cleaner. This 
solution will remove organic deposits which may build up in your lines due to organics left behind during the brewing 
process.  

Pressurized Cleaning Containers 

Kegco offers a wide range of pressurized and unpressurized cleaning containers used to clean your Hot Draft® lines. 
Completely follow all safety instructions and directions included with your cleaning containers. We recommend the 
pressurized cleaning containers below for cleaning your Hot Draft® lines. Contact Kegco at (888) 980-4810 or visit 

www.kegco.com

 for more information and placing an order. 

We recommend our Kegco Keg Beer Cleaning Can, best suited for commercial environments where there are many 
beverage lines to clean with less downtime available. This cleaning can will hold up to 18 Liters of cleaning solution, 
featuring up to 4 different keg valves to directly connect to multiple dispense systems without any disassembly.  

Cleaning Accessories

 

Kegco offers numerous accessories to guarantee a deeper clean. There are various brushes available for cleaning 
couplers, faucets, and loosening residue in beer lines. We offer many types of fittings to allow cleaning for all ranges of 
dispense systems. There are also multiple cleaning kits available which include everything you will need for cleaning your 
Hot Draft® dispense system. Contact Kegco at (888) 980-4810 or visi

www.kegco.com

 for more information. 

 

 

Summary of Contents for Hot Draft KC HDT301




















Reviews:

Related manuals for Hot Draft KC HDT301