BrewZilla 35L - Gen 4 Instruction Manual
Page
13
of
31
Last Updated 22/03/2022 16:53 PM
Fitting the Malt Pipe Handle
We recommend installing the malt pipe handle before you add your grain and malt pipe into
your BrewZilla.
To fit the handle feed one end of the handle through one hole in the malt pipe. Push the
handle in on one side far enough so you have enough clearance on the other side to feed
the handle into the opposing hole.
Once the handle has been fitted you can lift/manoeuvre the malt pipe easily.
Operation of the BrewZilla using the Digital Controller
The Gen 4.0 BrewZilla can be controlled using the buttons on the digital controller or
through the RAPT Portal.
If you do not intend to connect your device to the RAPT Portal and hence do not want to
utilise the Wi-Fi functionality of the controller you can choose to control the brewery using
only the digital controller. To remove the prompts requesting you to register your device to
the RAPT Portal you will need to disable the Wi-Fi in the settings of the controller. To do this
press select to enter the menu, then select
settings
, then navigate using the arrows to the
Disable Wi-Fi
settings, press select to disable Wi-Fi and the controller will then restart.
