Error Codes:
E1 =
Probe is open circuit (not connected/loose wire(s)/board failure)
E2 =
Probe short circuit (probe failure/board failure)
E3 =
Thermal cutout switch activated (Boiled dry?)
Technical Specification:
Warning:
•
The appliance must be on a flat, horizontal surface.
•
Ensure that safe operational access to the appliance is unrestricted.
•
Do not sit the appliance directly beneath or inside a sealed cupboard or space.
•
Do not use unit in a low ceiling space. Ceiling is susceptible to damage from water vapor.
•
Do not use your appliance outside without protection from the elements.
•
The appliance must be installed 100mm away from any walls.
•
Do not place on or near hot surfaces.
•
Do not allow your appliance to freeze. If this happens, do not operate the appliance and contact
your point of sale or the manufacturer.
