RAPT Fermentation Chamber Instruction Manual
Page
2
of
13
www.KegLand.com.au
Last Updated 1/03/2022 4:36 PM
WARNING
IF THE FRIDGE HAS JUST BEEN MOVED DO NOT TURN ON UNLESS IT HAS
BEEN STANDING UPRIGHT FOR ATLEAST 24 HOURS. FAILURE TO DO SO
WILL VOID WARRANTY. STAND FRIDGE IN THE UPRIGHT POSITION FOR 24
HOURS BEFORE PLUGGING INTO MAINS POWER SOCKET.
WARNING
ALWAYS THOROUGHLY CHECK FOR GAS LEAKS ONCE YOU HAVE SET UP
YOUR SYSTEM.
WARNING
CO
2
GAS CAN BE DANGEROUS. MAKE SURE TO ALWAYS USE CO
2
IN A WELL-
VENTILATED SPACE.
WARNING
ENSURE THERE IS OVER 100 mm CLEARANCE AT THE BACK OF THE RAPT
FERMENTATION CHAMBER TO ALLOW FOR ADEQUATE AIR FLOW AND
VENTILATION
WARNING
BE CAREFUL NOT TO CONTACT THE EXPOSED COLD PLATE WHEN ADDING
OR REMOVING FERMENTERS OR KEGS.
