RAPT Fermentation Chamber Instruction Manual
Page
3
of
13
www.KegLand.com.au
Last Updated 1/03/2022 4:36 PM
Watch our helpful instructional YouTube Videos
Video instructions now available. The KegLand YouTube Channel
(https://www.youtube.com/KegLand). You can find the link on our website www.KegLand.com.au
If there is any part of these videos above that you do not understand or you cannot access please
call or email www.KegLand.com.au or your nearest KegLand Distributor for more assistance.
Important
Let the RAPT Fermentation Chamber / Fridge sit upright for at least 24 hours after delivery or
after sitting the unit on its side before turning the unit on.
Be careful not to hit the exposed cold plate on the inside of the RAPT Fermentation Chamber /
Fridge when inserting or removing fermenters or kegs.
Always thoroughly check for gas leaks once you have set up your system if using the system for
keg dispensing or pressure fermentation.
Ensure there is over 100mm clearance at the back of the RAPT fermentation chamber to allow for
adequate airflow and ventilation
