2 Overview
Power Conversion System BCS-B-H Series (1000K-1500K)
User Manual
8
All rights reserved © Kehua Data Co., Ltd.
The grid-tied power generation of the PCS should be allowed by local power supply department and
operate by professionals.
The AC side of the PCS must be connected with IT distribution system.
2.1.1 Model Meaning
BCS
□□□
K
–
B
–
H
Rated power
When it is
“1000K”, it means the rated power is
1000K;
When it is
“1250K”, it means the rated power is
1250K;
And so on.
Without built-in transformer
BCS series power conversion system
High voltage
Figure2-2
Model meaning illustration
2.1.2 Features
Battery management
Bidirectional current transformation, charge and discharge the storage battery.
Can be charged in constant current or equalized charge mode or floating charge mode.
Can be discharged in constant power or constant current mode.
Perfect physics parameter
At most, 40 sets of the PCS can be used in parallel system. If the max. power of the PCS is
1500K, for 40 sets of the PCS, the max. power can be 60MW. It decreases the expansion cost and
achieves the best benefit for user.
The communication rate can be 2*100M, which achieves inter-switch of independent operation
and parallel operation between two circuits. It enhances the system operation rate and satisfies
the user needs for high efficiency and high speed.
The DC input voltage range is very wide, which is the leading level in partners. It is suitable for
use in various grid conditions.
Summary of Contents for BCS-B-H Series
Page 1: ...Power Conversion System BCS B H Series 1000K 1500K User Manual...
Page 2: ......
Page 96: ...4402 02858 005...
