7 Package, Transportation and Storage
Hybrid Inverter
User Manual
92
7 Package, Transportation and Storage
This chapter introduces the package, transportation and storage of device.
7.1 Package
The device is packaged by carton. When packaging, pay attention to the placing direction
requirements. On the side of the carton, there has warning icons, including keep dry, handle with care,
up, stacking layer limit, etc. On the other side of the carton, it prints the device model, etc. On the
front side of the carton, there is the logo of Kehua company and device name.
7.2 Transportation
During transporting, pay attention to the warnings on the carton. DO NOT make the device impact
severely. To avoid damaging the device, place the device strictly according to the placement direction.
DO NOT carry the device with the objects that is inflammable, explosive, or corrosive. DO NOT put
the device in the open-air while midway transshipment. Leaching or mechanical damage by rain,
snow or liquid objects is prohibited.
7.3 Storage
During storage, place the device strictly according to the direction that showed on the carton. Keep at
least 20cm from the bottom of the carton to floor and keep at least 50cm from the carton to wall, heat
source, cold source, windows or air inlet. The poisonous gas, inflammable or explosive or corrosive
chemical objects are prohibited. Besides, strong mechanical shaking, impact or strong magnetic field
is also prohibited. The storage temperature of inverter is -40
℃
-70
℃
.
