Hybrid Inverter
User Manual
5 Startup and Shutdown
79
inverter light on, connect the WIFI, and then select ON in
Basic setting
of APP to start the
system.
For the use of WIFI/4G, please see the built-in user manual in the packaging of WIFI.
Step 7 When the DC and AC supply power normally, the inverter will prepare to start, 60s later, the system
is operating normally, or check the insulation impedance.
Step 8 About 60s, the inverter will generate power normally. LED is always on.
Step 9 Working status can be queried on the APP.
----End
5.2 CEI Self-Check
The iStoragE1 product has the CEI self-check function, which is required only in Italy. Other countries
do not need to operate.
It is recommended to perform the self-check operation when the grid is normal. Self-check function
of CEI is integrated in Master APP for Italy safety country requirement. The function can only be
operated in the local APP mode. The specific operation steps are as follows.
Step 1 Operate in the APP login interface as below.
