3 Installation
MY-A Series (10kVA-20kVA) UPS
User Manual
32
----End
3.5 Electrical Connection
1.
Before connecting, ensure that the rear breakers of mains, battery are all open. DO NOT connect
wires with electricity.
2.
While wiring, avoid making the power wire at the place where is easy to be trod or tripped.
3.
DO NOT move the UPS after connect wires.
3.5.1 UPS Wiring Operation
10kVA
The wiring operation of 10kVA is the same, below we take MY10-A as an example to illustrate.
Step 1
Dismantle the wiring cover plate. There are notch at the bottom of the cover plate. When dismantle
the wiring cover plate, first dismantle the cover plate screws and then move the wiring cover plate
upwards for dismantle, as shown in Figure3-9.
Figure3-9
Dismantle the wiring cover plate
Step 2
The silk-screen of 10kVA is as shown in Figure3-10. Connect the input, output and grounding wire
to corresponding wiring terminal, as shown in Figure3-11 or Figure3-12.
