3 Installation
MY-A Series (10kVA-20kVA) UPS
User Manual
34
Figure3-12
Wiring diagram 2 of 10kVA
1.
Please pay attention to the wiring safety when MY10-AS is wiring. DO NOT touch the battery
terminal bar unless connecting with external battery!
2.
UPS wiring must be strictly in accordance with Figure3-11 or Figure3-12 to avoid short circuit.
3.
It is necessary to confirm that all wires are connected to the terminal properly and reliably
before reinstall the wiring cover plate.
Step 3
Reinstall the wiring cover plate.
Step 4
Divide the wires into two bundles and fixed to the bottom of device through cable tie.
Figure3-13
Wires fixation