5 LCD Screen Operation
MY-A Series (10kVA-20kVA) UPS
User Manual
84
5.5.5 Permission Setting
In the Settings management page, select "Permission" option to enter the password entry page first,
as shown in Figure5-14.
Figure5-14
Password input page
By short pressing the up/down page button to achieve page option selection, when selecting the lower
right corner of the back button, the return button will be displayed as an opposite color state, at this
time short press function button can enter the page to the previews level of the page, the password
input page on the previews level of the page for the settings management page.
In the password input page, short press "
"
button can enter the password settings, at this time the
first password flickering from the left, by short press the up/down page button can achieve the first
bit password value minus/plus operation, select the required value, then short press "
"
button into
the second bit password settings. The second to sixth bit password is set the same way, which is not
repeated here. The password input range is 000000-999999.
After the sixth bit passwords is entered, press the "
"
button shortly, at which point if the password
entered does not match the current system password, the screen will display the word "password
error", and if the password entered matches the current system password, the system will enter the
permission set page according to the current input password permission.
Figure5-15
Permission setting page 1
